The Model H8.0-10000W Wind generator has the great advantages of high efficiency and low rated wind speed. It introduces several patented technologies and uses some special materials.
The off-grid controller adopts the integrated design which consists of the controlling, inverting and load-diverting parts. It fulfills the functions of charging and protection for over charging/discharging, over-loading and short circuit, also supplies a diversion load. The controller outputs sine wave and has a spare interface for solar energy. Without especial fixation, the controller for 10000W could be connected to the solar panel within 3500W.
The on-grid controller can connect wind power to electrical grid.
The Yaw Shaft has the equipment of electric slip ring inside which can ensure the free running of generator without cable twisting. Due to the modularization-design, Model H8.0-10000W Wind Turbine is free for maintenance and easy for installation. It can be installed only by the manual work, without welding, concrete or cranes. Even a tyro can handle it easily and swiftly.
H8.0-10000W Wind Turbine has the features of extreme smallness and lightness, low-wind start, low rated wind speed, quick output in low wind, reliability with speed restriction and quiet-stable running.
Light
Only 200kgs (including the generator, hub, bearing and nose cone)
Small
Small in size (generator contained in nose cone);
Few in self-radiation
Little in noise;
Low in rated wind speed.
Swift
Swift start-up: with wind speed at 3.5m/s;
Swift rotating: 1.5 to 3 times faster than the common one;
Swift charging.
Stable
Safe in operation: equipped with a manual-brake and a protective auto-deflection device; Stable in running: the structure is compact and all the blades are drilled by mould ( the error is only ±1mm), which balance well. Excellent in material: the tail pole is made from manganese steel, tail wing with stainless steel and yaw shaft with superior steel. Steady in generating: there is a protection for overcharging, over-discharging, short circuit and over loading.
Application of Model H8.0-10000W
It can drive air-condition (8-10 horsepower), pump or other electrical appliances (≥8KW).
Well used in:
Housing
Telecommunications Station
TV Transfer Station
Monitoring Station (military, hydrology, observatory)
Water-pumping Station
Main technical data
1.Rotor blade diameter: 8.0m
2.Numbers of blade: 3
3.Start up wind speed: 3.0m/s
4.Rated wind speed: 10.0m/s
5.Rated output power: 10000W
6.Maxim output:≥15000W
7.Charge Voltage: DC300V
8.Output Voltage: AC 110V,120V,220V,230V,240V
9.Pole Height: 14m
10.Generator weight: 150kg
11.Pole diameter: 360mm
12.Temperature of working surrounding:±45°C
AN HUI HUMMER DYNAMO CO.,LTD 
Add:Room 2904, 5# building , Jindi international city ,No. 88 South of MaAnShan Road ,hefei, Anhui province , China 
TeL:+86-86-551-3441231 3441230 - Fax:+86-551-3442991
- Contac Person:Mr.Tan
- E-Mail:sales@allwindenergy.com
- WebSite:www.allwindenergy.com
